SKF · rolling bearings
SKF BA 9
Thrust ball bearings — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Bore diameter | 9 mm |
|---|---|
| Outside diameter | 20 mm |
| Height | 7 mm |
| Basic dynamic load rating | 3.12 kN |
| Basic static load rating | 3.8 kN |
| Reference speed | 12000 r/min |
| Limiting speed | 16000 r/min |
| Axial load capability | Single-direction |
| Number of rows | 1 |
| Cage | Sheet metal |
| Housing washer type | Flat |
| Tolerance class | Normal |
| Material, bearing | Bearing steel |
| Coating | Without |
| Indicative carbon footprint for new product | 0.04 kg CO_2e |
| Product net weight | 0.00986 kg |
| eClass code | 23-05-10-01 |
| UNSPSC code | 31171507 |
| Dimensions · Bore diameter · (d) | 9 mm |
| Dimensions · Outside diameter · (D) | 20 mm |
| Dimensions · Height · (H) | 7 mm |
| Dimensions · Outside diameter shaft washer · (d_1) · ≈ | 19.8 mm |
| Dimensions · Inner diameter housing washer · (D_1) · ≈ | 9.2 mm |
| Dimensions · Chamfer dimension washer · (r_1,2) · min. | 0.3 mm |
| Abutment dimensions · Abutment diameter shaft · (d_a) · min. | 15.5 mm |
| Abutment dimensions · Abutment diameter housing · (D_a) · max. | 13.5 mm |
| Abutment dimensions · Fillet radius · (r_a) · max. | 0.3 mm |
| Calculation data · Basic dynamic load rating · (C) | 3.12 kN |
| Calculation data · Basic static load rating · (C_0) | 3.8 kN |
| Calculation data · Fatigue load limit · (P_u) | 0.143 kN |
| Calculation data · Reference speed | 12000 r/min |
| Calculation data · Limiting speed | 16000 r/min |
| Calculation data · Minimum load factor · (A) | 0.0001 |
Family specifications and selection conditions
| Product description | Single direction thrust ball bearings can accommodate axial loads in one direction. They must not be subjected to any radial load. Their separable components facilitate mounting/dismounting and maintenance inspections. Many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit. |
|---|---|
| Manufacturer features | Separable design facilitates mounting/dismounting and maintenance inspections • Interchangeable components • Ground bore of shaft washers enable interference fit |
Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.