BEARING WORLD

SKF · industrial seals

SKF APR4-10000-AD1

Piston seals — manufacturer technical reference and quotation support in Saudi Arabia.

Product directory / SKF

Request a quote for this productTalk to Bearing World

لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.

Manufacturer-listed technical specifications
Cylinder bore diameter254 mm
Piston groove diameter232.66 mm
Piston groove width9.53 mm
Pressure limit, maximum35 N/mm²
DesignAPR
Primary sealing elementPolytetrafluoroethylene (PTFE 741)
Compound 2Nitrile Rubber (NBR A-8501)
Compound 3Nitrile Rubber (NBR A-8501)
Unit systemInch
Product net weight0.117 kg
eClass code23-07-01-90
UNSPSC code31181602
Dimensions · Cylinder bore diameter · (D)254 mm
Dimensions · Piston groove diameter · (d)232.66 mm
Dimensions · Piston groove width · (L)9.53 mm
Dimensions · Radial depth · (S)10.67 mm
Dimensions · Groove radius · (R) · max.0.89 mm
Dimensions · Lead-in chamfer length · (C) · min.6.35 mm
Dimensions · Tolerances · Upper limit deviation · (tol D)0.15 mm
Dimensions · Tolerances · Lower limit deviation0 mm
Dimensions · Tolerances · Upper limit deviation · (tol d)0 mm
Dimensions · Tolerances · Lower limit deviation-0.15 mm
Dimensions · Tolerances · Upper limit deviation · (tol L)0.127 mm
Maximum extrusion gap · Reference temperature for extrusion gap80 °C
Maximum extrusion gap · Extrusion gap at 70 bar · (e)0.76 mm
Maximum extrusion gap · Extrusion gap at 210 bar · (e)0.25 mm
Maximum extrusion gap · Extrusion gap at 350 bar · (e)0.15 mm
Pressure and speed · Pressure · max.350 bar
Pressure and speed · Speed · max.1 m/s
Operating temperature · Extreme upper temperature limit · (T_6) · max.130 °C
Operating temperature · Reduced performance upper temperature limit · (T_5) · max.110 °C
Operating temperature · Upper operating temperature limit · (T_4) · max.100 °C
Operating temperature · Lower operating temperature limit · (T_3) · min.-20 °C
Operating temperature · Reduced performance lower temperature limit · (T_2) · min.-30 °C
Operating temperature · Extreme lower temperature limit · (T_1) · min.-40 °C
Operating temperature · DimensionMaximum values of application parameters (e.g. pressure, speed, temperature, e-gap) should not be applied continuously nor simultaneously.
Materials · Primary sealing elementPolytetrafluoroethylene (PTFE 741)
Materials · Additional elementNitrile Rubber (NBR A-8501)

Family specifications and selection conditions

Manufacturer-listed technical specifications
Product descriptionAPR seals are double-acting piston seals with a PTFE slide ring and a nitrile rubber O-ring energizer. The slide ring incorporates a nitrile rubber X-ring at the dynamic interface to improve sealing performance. Notches in the slide ring edges enable rapid pressurization of the seal to react quickly to changes in pressure and direction.
Manufacturer featuresImproved sealing performance • Suitable for light to medium duty applications • Available in metric and inch sizes • Fit seal housings in accordance with ISO 7425-1 for some metric sizes • If not in stock alternatives can be produced by SKF SEAL JET systems

Manufacturer references

Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.

Explore SKF at Bearing World