SKF · industrial seals
SKF 667X700X50 DO CR60
Metal face seals — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Inside diameter | 667 mm |
|---|---|
| Outside diameter | 700 mm |
| Seal width | 50 mm |
| Shaft diameter, maximum | 652 mm |
| Nominal bore depth | 21.3 mm |
| Design | With O-rings (DO) |
| Sealing lip material | Cast iron |
| Rubber energizer | Nitrile rubber (NBR) |
| Product net weight | 9.12 kg |
| eClass code | 23-07-08-02 |
| UNSPSC code | 31181602 |
| Dimensions · Seal rings · Inside diameter of metal sealing ring · (d_3) | 667 mm |
| Dimensions · Seal rings · Outside diameter of metal sealing ring · (d_4) | 700 mm |
| Dimensions · Seal rings · Width of metal sealing rings · (b) | 50 mm |
| Dimensions · Housing · Diameter of locking nose · (D) | 704.7 mm |
| Dimensions · Housing · Tolerance of locking nose diameter D · ± | 0.2 mm |
| Dimensions · Housing · Shoulder diameter · (D_1) | 687.7 mm |
| Dimensions · Housing · Large ramp diameter · (D_2) | 705.6 mm |
| Dimensions · Housing · Tolerance of large ramp diameter D_2 · ± | 0.2 mm |
| Dimensions · Housing · Ramp angle · (α) | 10 ° |
| Dimensions · Housing · Housing bore depth · (B) | 21.3 mm |
| Dimensions · Housing · Width of gap · (B_1) | 12 mm |
| Dimensions · Housing · Tolerance of gap B_1 · ± | 0.5 mm |
| Dimensions · Housing · Housing depth · (B_2) | 26.2 mm |
| Dimensions · Housing · Shaft diameter · (d_1) · max. | 652 mm |
| Dimensions · Housing · Width of locking nose · (C) | 3.7 mm |
| Dimensions · Housing · Radius of housing corner · (r) | 1 mm |
| Dimensions · Housing · Radius on locking nose · (r_1) | 1.2 mm |
| Dimensions · Housing · Radius on locking nose · (r_2) | 6.3 mm |
| Materials · Primary sealing element | Cast iron |
| Materials · Rubber energizer | Nitrile rubber (NBR) |
| Application and operating conditions · Operating temperature · min. | -35 °C |
| Application and operating conditions · Operating temperature · max. | 100 °C |
| Application and operating conditions · Operating temperature, brief periods · max. | 120 °C |
| Application and operating conditions · Attainable circumferential speed · max. | 5 m/s |
| Application and operating conditions · Circumferential speed with grease lubrication · max. | 1 m/s |
| Application and operating conditions · Pressure differential, continuous operation · max. | 0.25 MPa |
| Application and operating conditions · Pressure differential, brief periods · max. | 0.3 MPa |
| Application and operating conditions · Dimension | Maximum values of application parameters should not be applied simultaneously. |
Family specifications and selection conditions
| Product description | Metal face seals are designed for use in severe service conditions at relatively low speeds. They consist of two identical metal sealing rings and two O-rings made of nitrile or other rubber compounds. They provide reliable protection against solid and liquid contaminants as well as leak-proof retention of lubricants. They are suitable for a range of applications where effective protection is required against sand, soil, mud, water, etc. |
|---|---|
| Manufacturer features | For severe conditions • Metal to metal |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.