SKF · rolling bearings
SKF 6203-2RSF/C3GJN7/AG
Deep groove ball bearings — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Bore diameter | 17 mm |
|---|---|
| Outside diameter | 40 mm |
| Width | 12 mm |
| Basic dynamic load rating | 9.95 kN |
| Basic static load rating | 4.75 kN |
| Limiting speed | 4000 r/min |
| SKF performance class | SKF Explorer |
| Filling slots | Without |
| Number of rows | 1 |
| Locating feature, bearing outer ring | Without |
| Bore type | Cylindrical |
| Cage | Sheet metal |
| Matched arrangement | No |
| Radial internal clearance | C3 |
| Material, bearing | Bearing steel |
| Coating | Without |
| Sealing | Seal on both sides |
| Sealing type | Contact |
| Lubricant | Grease |
| Relubrication feature | Without |
| Indicative carbon footprint for new product | 0.26 kg CO_2e |
| Product net weight | 0.069 kg |
| eClass code | 23-05-08-01 |
| UNSPSC code | 31171504 |
| Dimensions · Bore diameter · (d) | 17 mm |
| Dimensions · Deviation limits of mid-range bore diameter · (t_Δdmp) | -0.007 to 0 mm |
| Dimensions · Outside diameter · (D) | 40 mm |
| Dimensions · Deviation limits of mid-range outside diameter · (t_ΔDmp) | -0.009 to 0 mm |
| Dimensions · Width · (B) | 12 mm |
| Dimensions · Deviation limits of ring width · (t_ΔBs) | -0.06 to 0 mm |
| Dimensions · Shoulder diameter · (d_1) · ≈ | 24.5 mm |
| Dimensions · Recess diameter · (d_2) · ≈ | 23 mm |
| Dimensions · Shoulder diameter · (D_1) · ≈ | 32.7 mm |
| Dimensions · Recess diameter · (D_2) · ≈ | 33.7 mm |
| Dimensions · Chamfer dimension · (r_1,2) · min. | 1 mm |
| Dimensions · ISO tolerance class for dimensions | P6 and tighter width tolerance |
| Abutment dimensions · Diameter of shaft abutment · (d_a) · min. | 21.2 mm |
| Abutment dimensions · Diameter of shaft abutment · (d_a) · max. | 22.6 mm |
| Abutment dimensions · Diameter of housing abutment · (D_a) · max. | 35.8 mm |
| Abutment dimensions · Radius of shaft or housing fillet · (r_a) · max. | 0.6 mm |
| Calculation data · SKF performance class | SKF Explorer |
| Calculation data · Basic dynamic load rating · (C) | 9.95 kN |
| Calculation data · Basic static load rating · (C_0) | 4.75 kN |
| Calculation data · Fatigue load limit · (P_u) | 0.2 kN |
| Calculation data · Limiting speed | 4000 r/min |
| Calculation data · Minimum load factor · (k_r) | 0.025 |
| Calculation data · Calculation factor · (f_0) | 13.1 |
| Tolerances of run-out · Range of section height at inner ring of assembled bearing · (t_Kia) | 4 µm |
| Tolerances of run-out · Maximum run-out of inner ring side face to the bore · (t_Sd) | 7 µm |
| Tolerances of run-out · Maximum axial run-out of inner ring of assembled bearing · (t_Sia) | 7 µm |
| Tolerances of run-out · Range of section height at outer ring of assembled bearing · (t_Kea) | 7 µm |
| Tolerances of run-out · Perpendicularity of outer ring outside surface · (t_SD) | 4 µm |
| Tolerances of run-out · Maximum axial run-out of outer ring of assembled bearing · (t_Sea) | 8 µm |
| Tolerances of run-out · ISO tolerance class for geometrical tolerances | P5 |
Family specifications and selection conditions
| Product description | SKF Deep groove ball bearings for highly contaminated environments are equipped with robust steel shields and strong rubber lips sealing against precision-ground counterfaces on the inner ring. The seals are designed to protect against fluid and solid contaminants. Variants with the designation suffix AG provide enhanced corrosion resistance of the seal. Also available on request with special sized bore and/or outside diameters, suitable for reworked shafts and housings. |
|---|---|
| Manufacturer features | Effective exclusion of fluid and solid contaminants • Simple, versatile, and robust design • Accommodate radial loads and axial loads in both directions • Require less maintenance in highly contaminated environments |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.