SKF · industrial seals
SKF 48.5X62.5X25.6 DF CR60
Metal face seals — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Inside diameter | 48.5 mm |
|---|---|
| Outside diameter | 62.5 mm |
| Seal width | 25.6 mm |
| Shaft diameter, maximum | 33.5 mm |
| Nominal bore depth | 10.6 mm |
| Design | With Belleville washers (DF) |
| Sealing lip material | Cast iron |
| Rubber energizer | Nitrile rubber (NBR) |
| Product net weight | 0.135 kg |
| eClass code | 23-07-08-02 |
| UNSPSC code | 31181602 |
| Dimensions · Seal rings · Inside diameter of metal sealing ring · (d_3) · min. | 48.5 mm |
| Dimensions · Seal rings · Outside diameter of metal sealing ring · (d_4) | 62.5 mm |
| Dimensions · Seal rings · Width of metal sealing rings · (b) · max. | 25.6 mm |
| Dimensions · Housing · Housing bore diameter · (D) | 76.3 mm |
| Dimensions · Housing · Tolerance of housing bore D · ± | 0.16 mm |
| Dimensions · Housing · Shoulder diameter · (D_1) | 62.9 mm |
| Dimensions · Housing · Housing bore depth · (B) | 10.6 mm |
| Dimensions · Housing · Width of gap · (B_1) | 1.5 mm |
| Dimensions · Housing · Tolerance of gap B_1 · ± | 0.5 mm |
| Dimensions · Housing · Housing depth · (B_2) | 14 mm |
| Dimensions · Housing · Shaft diameter · (d_1) · max. | 33.5 mm |
| Dimensions · Housing · Length of housing chamfer · (C) | 1.6 mm |
| Dimensions · Housing · Angle of housing chamfer · (α) | 30 ° |
| Dimensions · Housing · Radius of housing corner · (r) · max. | 1 mm |
| Materials · Primary sealing element | Cast iron |
| Materials · Rubber energizer | Nitrile rubber (NBR) |
| Application and operating conditions · Operating temperature · min. | -35 °C |
| Application and operating conditions · Operating temperature · max. | 100 °C |
| Application and operating conditions · Operating temperature, brief periods · max. | 120 °C |
| Application and operating conditions · Attainable circumferential speed · max. | 1 m/s |
| Application and operating conditions · Circumferential speed with grease lubrication · max. | 0.5 m/s |
| Application and operating conditions · Pressure differential, continuous operation · max. | 0.25 MPa |
| Application and operating conditions · Pressure differential, brief periods · max. | 0.35 MPa |
| Application and operating conditions · Dimension | Maximum values of application parameters should not be applied simultaneously. |
Family specifications and selection conditions
| Product description | Metal face seals are designed for use in severe service conditions at relatively low speeds. They consist of two identical metal sealing rings and two cup springs made of nitrile or fluoro rubber compounds. They provide reliable protection against solid and liquid contaminants as well as leak-proof retention of lubricants. They are suitable for a range of applications where effective protection is required against sand, soil, mud, water, etc. |
|---|---|
| Manufacturer features | For severe conditions • Metal to metal |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.