SKF · industrial seals
SKF 37433
Radial shaft seals — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 95.25 mm |
|---|---|
| Housing bore diameter | 123.85 mm |
| Seal width | 11.13 mm |
| Maximum operating temperature | 100 °C |
| Minimum operating temperature | -40 °C |
| Permissible circumferential speed | 10.5 m/s |
| Rotational speed | 2100 r/min |
| Limiting speed | 2100 r/min |
| Design | CRWH1 |
| Auxiliary lip | No |
| Sealing lip material | Nitrile rubber (NBR) |
| Unit system | Inch |
| Type of outside diameter | Metal-cased with sealant coating on the outside diameter |
| Product net weight | 0.12 kg |
| eClass code | 23-07-08-01 |
| UNSPSC code | 31181602 |
| Metric/inch series | Inch |
| Dimensions · Shaft diameter · (d_1) | 95.25 mm |
| Dimensions · Housing bore diameter · (D) | 123.85 mm |
| Dimensions · Seal width · (b) | 11.13 mm |
| Application and operating conditions · Operating temperature · min. | -40 °C |
| Application and operating conditions · Operating temperature · max. | 100 °C |
| Application and operating conditions · Circumferential speed · max. | 10.5 m/s |
| Application and operating conditions · Rotational speed · max. | 2100 r/min |
| Application and operating conditions · Pressure differential · max. | 0.07 N/mm² |
| Associated products · SKF Speedi-Sleeve | 99374 |
Family specifications and selection conditions
| Product description | Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore. |
|---|---|
| Manufacturer features | For oil or grease • With garter spring • WAVE lip creates higher pumping rate • WAVE lip has less friction between shaft and lip • WAVE lip has a lower temperature at the contact point |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.