SKF · rolling bearings
SKF 240/900 BC
Spherical roller bearings — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Bore diameter | 900 mm |
|---|---|
| Outside diameter | 1280 mm |
| Width | 375 mm |
| Basic dynamic load rating | 16215 kN |
| Basic static load rating | 34000 kN |
| Reference speed | 20 r/min |
| Limiting speed | 40 r/min |
| SKF performance class | SKF Explorer |
| Number of rows | 2 |
| Locating feature, bearing outer ring | Without |
| Bore type | Cylindrical |
| Cage | Machined metal |
| Radial internal clearance | CN |
| Tolerance class for dimensions | Normal |
| Tolerance class for run-out | Normal |
| Sealing | Without |
| Lubricant | None |
| Relubrication feature | With |
| Candidate for remanufacturing | Yes |
| Indicative carbon footprint for new product | 5920 kg CO_2e |
| Indicative carbon footprint for remanufactured product | 1968 kg CO_2e |
| Product net weight | 1600 kg |
| eClass code | 23-05-09-11 |
| UNSPSC code | 31171510 |
| Dimensions · Bore diameter · (d) | 900 mm |
| Dimensions · Deviation limits of mid-range bore diameter · (t_Δdmp) | -0.1 to 0 mm |
| Dimensions · Outside diameter · (D) | 1280 mm |
| Dimensions · Deviation limits of mid-range outside diameter · (t_ΔDmp) | -0.16 to 0 mm |
| Dimensions · Width · (B) | 375 mm |
| Dimensions · Deviation limits of ring width · (t_ΔBs) | -1 to 0 mm |
| Dimensions · Shoulder diameter of inner ring · (d_2) · ≈ | 1024 mm |
| Dimensions · Shoulder/recess diameter of outer ring · (D_1) · ≈ | 1164 mm |
| Dimensions · Width of lubrication groove · (b) | 69.1 mm |
| Dimensions · Diameter of lubrication hole · (K) | 15 mm |
| Dimensions · Chamfer dimension · (r_1,2) · min. | 7.5 mm |
| Dimensions · ISO tolerance class for dimensions | Normal |
| Abutment dimensions · Diameter of shaft abutment · (d_a) · min. | 928 mm |
| Abutment dimensions · Diameter of housing abutment · (D_a) · max. | 1252 mm |
| Abutment dimensions · Radius of fillet · (r_a) · max. | 6 mm |
| Calculation data · SKF performance class | SKF Explorer |
| Calculation data · Basic dynamic load rating · (C) | 16215 kN |
| Calculation data · Basic static load rating · (C_0) | 34000 kN |
| Calculation data · Fatigue load limit · (P_u) | 2040 kN |
| Calculation data · Reference speed | 20 r/min |
| Calculation data · Limiting speed | 40 r/min |
| Calculation data · Limiting value · (e) | 0.27 |
| Calculation data · Calculation factor · (Y_1) | 2.5 |
| Calculation data · Calculation factor · (Y_2) | 3.7 |
| Calculation data · Calculation factor · (Y_0) | 2.5 |
| Tolerances of run-out · Range of section height at inner ring of assembled bearing · (t_Kia) | 90 µm |
| Tolerances of run-out · Range of section height at outer ring of assembled bearing · (t_Kea) | 190 µm |
| Tolerances of run-out · ISO tolerance class for geometrical tolerances | Normal |
| Radial internal clearance · Minimum initial clearance | 430 µm |
| Radial internal clearance · Maximum initial clearance | 650 µm |
Family specifications and selection conditions
| Product description | Spherical roller bearing for wind turbine main shafts are optimized to handle the varying direction and high thrust loads of wind energy applications, allowing to perform more reliably under typical operating conditions. A modified inner geometry with super-finished functional surfaces makes this possible. Using a one-piece roller-guided cast-iron cage and an enlarged lubrication groove increases robustness. Also available on request with special sized bore and/or outside diameters, suitable for reworked shafts and housings. |
|---|---|
| Manufacturer features | Improved performance under wind operating conditions • Accommodate misalignment • Up to twice the fatigue life • Increased robustness for both radial and axial load conditions • Improved lubrication |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.