SKF · rolling bearings
SKF 240/560 BC
Spherical roller bearings — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Bore diameter | 560 mm |
|---|---|
| Outside diameter | 820 mm |
| Width | 258 mm |
| Basic dynamic load rating | 7530 kN |
| Basic static load rating | 14000 kN |
| Reference speed | 20 r/min |
| Limiting speed | 50 r/min |
| SKF performance class | SKF Explorer |
| Number of rows | 2 |
| Locating feature, bearing outer ring | Without |
| Bore type | Cylindrical |
| Cage | Machined metal |
| Radial internal clearance | CN |
| Tolerance class for dimensions | Normal |
| Tolerance class for run-out | Normal |
| Sealing | Without |
| Lubricant | None |
| Relubrication feature | With |
| Candidate for remanufacturing | Yes |
| Indicative carbon footprint for new product | 1721 kg CO_2e |
| Indicative carbon footprint for remanufactured product | 572 kg CO_2e |
| Product net weight | 465 kg |
| eClass code | 23-05-09-11 |
| UNSPSC code | 31171510 |
| Dimensions · Bore diameter · (d) | 560 mm |
| Dimensions · Deviation limits of mid-range bore diameter · (t_Δdmp) | -0.05 to 0 mm |
| Dimensions · Outside diameter · (D) | 820 mm |
| Dimensions · Deviation limits of mid-range outside diameter · (t_ΔDmp) | -0.1 to 0 mm |
| Dimensions · Width · (B) | 258 mm |
| Dimensions · Deviation limits of ring width · (t_ΔBs) | -0.5 to 0 mm |
| Dimensions · Shoulder diameter of inner ring · (d_2) · ≈ | 640 mm |
| Dimensions · Shoulder/recess diameter of outer ring · (D_1) · ≈ | 739 mm |
| Dimensions · Width of lubrication groove · (b) | 53.2 mm |
| Dimensions · Diameter of lubrication hole · (K) | 15 mm |
| Dimensions · Chamfer dimension · (r_1,2) · min. | 6 mm |
| Dimensions · ISO tolerance class for dimensions | Normal |
| Abutment dimensions · Diameter of shaft abutment · (d_a) · min. | 583 mm |
| Abutment dimensions · Diameter of housing abutment · (D_a) · max. | 797 mm |
| Abutment dimensions · Radius of fillet · (r_a) · max. | 5 mm |
| Calculation data · SKF performance class | SKF Explorer |
| Calculation data · Basic dynamic load rating · (C) | 7530 kN |
| Calculation data · Basic static load rating · (C_0) | 14000 kN |
| Calculation data · Fatigue load limit · (P_u) | 965 kN |
| Calculation data · Reference speed | 20 r/min |
| Calculation data · Limiting speed | 50 r/min |
| Calculation data · Limiting value · (e) | 0.3 |
| Calculation data · Calculation factor · (Y_1) | 2.3 |
| Calculation data · Calculation factor · (Y_2) | 3.4 |
| Calculation data · Calculation factor · (Y_0) | 2.2 |
| Tolerances of run-out · Range of section height at inner ring of assembled bearing · (t_Kia) | 70 µm |
| Tolerances of run-out · Range of section height at outer ring of assembled bearing · (t_Kea) | 140 µm |
| Tolerances of run-out · ISO tolerance class for geometrical tolerances | Normal |
| Radial internal clearance · Minimum initial clearance | 280 µm |
| Radial internal clearance · Maximum initial clearance | 440 µm |
Family specifications and selection conditions
| Product description | Spherical roller bearing for wind turbine main shafts are optimized to handle the varying direction and high thrust loads of wind energy applications, allowing to perform more reliably under typical operating conditions. A modified inner geometry with super-finished functional surfaces makes this possible. Using a one-piece roller-guided cast-iron cage and an enlarged lubrication groove increases robustness. Also available on request with special sized bore and/or outside diameters, suitable for reworked shafts and housings. |
|---|---|
| Manufacturer features | Improved performance under wind operating conditions • Accommodate misalignment • Up to twice the fatigue life • Increased robustness for both radial and axial load conditions • Improved lubrication |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.