SKF · rolling bearings
SKF 1726306-2RS1
Insert bearings — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 30 mm |
|---|---|
| Bore diameter | 30 mm |
| Outside diameter | 72 mm |
| Width, total | 19 mm |
| Width, inner ring | 19 mm |
| Width, outer ring | 19 mm |
| Basic dynamic load rating | 28.1 kN |
| Basic static load rating | 16 kN |
| Limiting speed | 6300 r/min |
| Retaining feature, inner ring | Interference fit |
| Bore type | Cylindrical |
| Rolling elements | Balls |
| Outer ring type | Spherical |
| Inner ring extension | None (standard ring) |
| Cage | Non-metallic |
| Rubber seating ring | Without |
| Material, bearing | Bearing steel |
| Coating | Without |
| Sealing | Seal on both sides |
| Sealing type | Contact, RS1 |
| Lubricant | Grease |
| Relubrication feature | Without |
| Product net weight | 0.33 kg |
| eClass code | 23-05-08-02 |
| UNSPSC code | 31171536 |
| Dimensions · Bore diameter · (d) | 30 mm |
| Dimensions · Outside diameter · (D) | 72 mm |
| Dimensions · Width of inner ring · (B) | 19 mm |
| Dimensions · Outside diameter of inner ring · (d_1) · ≈ | 44.6 mm |
| Dimensions · Chamfer dimension of inner ring · (r_1,2) · min. | 1.1 mm |
| Calculation data · Basic dynamic load rating · (C) | 28.1 kN |
| Calculation data · Basic static load rating · (C_0) | 16 kN |
| Calculation data · Fatigue load limit · (P_u) | 0.67 kN |
| Calculation data · Limiting speed | 6300 r/min |
| Calculation data · Calculation factor · (f_0) | 13 |
Family specifications and selection conditions
| Product description | Insert bearings are based on sealed deep groove ball bearings. These insert bearings are suitable for applications where smooth running is a key operational parameter. It can accommodate heavier axial loads than any other insert bearing. The bearings are sealed on both sides, made of sheet steel reinforced NBR, and are fitted in a recess on the outer ring and ride against the inner ring shoulder to act as contact seals. |
|---|---|
| Manufacturer features | Smooth running • Can accommodate havy axial loads • Sealed on both sides |
Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.