Semperit · Hoses
Semperit SEMPERPAC 2SNK · Nominal 25 mm
SEMPERPAC 2SNK — manufacturer technical reference and quotation support in Saudi Arabia.
Manufacturer-listed size variant: no separate article number is published for this size in the source table. The size label is not an invented part number.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Nominal | 25 mm |
|---|---|
| Nominal | 1 inch |
| Nominal | -16 dash |
| Internal-Ø | 26.0 mm |
| Internal-Ø | 1.02 inch |
| Braid-Ø | 32.9 mm |
| Braid-Ø | 1.30 inch |
| External-Ø | 35.6 mm |
| External-Ø | 1.40 inch |
| Work. pressure (max.) | 200 bar |
| Work. pressure (max.) | 2900 psi |
| Min. burst pressure | 800 bar |
| Min. burst pressure | 11600 psi |
| Bending radius (min.) | 150 mm |
| Bending radius (min.) | 5.9 inch |
| Weight approx. | 0.77 lbs/ft |
| Weight approx. | 1.15 kg/m |
Family specifications and selection conditions
| Tube | Synthetic rubber, resistant against hydraulic fluids (HL, HLP, HLPD, HVLP, HFA, HFAS, HFB, HFC) |
|---|---|
| Reinforcement | Two braids of high tensile steel wire |
| Cover | Abrasion and ozone resistant synthetic rubber Note: various covers available |
| Temperature range | -40°C to 100°C / -40°F to +212°F (max 120°C / 248°F intermittent) |
| Standard branding | Embossed tape |
| Note | Impulse tested up to 1 million cycles (tested acc. to ISO6803:2017 / DN31 tested up to 200.000 cycles) |
Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.