Semperit · Hoses
Semperit Flexline 5000 · Nominal 31 mm
Flexline 5000 — manufacturer technical reference and quotation support in Saudi Arabia.
Manufacturer-listed size variant: no separate article number is published for this size in the source table. The size label is not an invented part number.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Nominal | 31 mm |
|---|---|
| Nominal | 1-1/4 inch |
| Nominal | -20 dash |
| Reinforcement layers | 4 |
| Internal-Ø | 32.5 mm |
| Internal-Ø | 1.28 inch |
| Reinforcement-Ø | 42.3 mm |
| Reinforcement-Ø | 1.67 inch |
| External-Ø | 45.9 mm |
| External-Ø | 1.81 inch |
| Work. pressure (max.) | 350 bar |
| Work. pressure (max.) | 5075 psi |
| Min. burst pressure | 1400 bar |
| Min. burst pressure | 20300 psi |
| Bending radius (min.) | 210 mm |
| Bending radius (min.) | 8.3 inch |
| Weight approx. | 1.71 lbs/ft |
| Weight approx. | 2.55 kg/m |
Family specifications and selection conditions
| Tube | Synthetic rubber, resistant against hydraulic fluids (HL, HLP, HLPD, HVLP, HFA, HFAS, HFB, HFC) and bio-degradable hydraulic fluids |
|---|---|
| Reinforcement | Two (2W), four (4W) or six (6W) layers of high tensile steel wire |
| Cover | Abrasion and ozone resistant synthetic rubber – accepted by MSHA Note: various covers available |
| Temperature range | -40°C to 100°C / -40°F to +212°F (2W) -40°C to 121°C / -40°F to +250°F (4W+6W) |
| Standard branding | Mylar tape |
| Note | Impulse tested up to 500.000 cycles (tested acc. to ISO6803:2017) |
Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.