Semperit · Hoses
Semperit Flexline 4000 · Nominal 38 mm
Flexline 4000 — manufacturer technical reference and quotation support in Saudi Arabia.
Manufacturer-listed size variant: no separate article number is published for this size in the source table. The size label is not an invented part number.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Nominal | 38 mm |
|---|---|
| Nominal | 1-1/2 inch |
| Nominal | -24 dash |
| Reinforcement layers | 4 |
| Internal-Ø | 38.7 mm |
| Internal-Ø | 1.52 inch |
| Reinforcement-Ø | 49.2 mm |
| Reinforcement-Ø | 1.94 inch |
| External-Ø | 53.4 mm |
| External-Ø | 2.1 inch |
| Work. pressure (max.) | 280 bar |
| Work. pressure (max.) | 4060 psi |
| Min. burst pressure | 1120 bar |
| Min. burst pressure | 16240 psi |
| Bending radius (min.) | 250 mm |
| Bending radius (min.) | 9.84 inch |
| Weight approx. | 2.22 lbs/ft |
| Weight approx. | 3.31 kg/m |
Family specifications and selection conditions
| Tube | Synthetic rubber, resistant against hydraulic fluids (HL, HLP, HLPD, HVLP, HFA, HFAS, HFB, HFC) |
|---|---|
| Reinforcement | One (1W), two (2W) or four (4W) layers of high tensile steel wire |
| Cover | Abrasion and ozone resistant synthetic rubber – accepted by MSHA Note: various covers available |
| Temperature range | -40°C to 100°C / -40°F to +212°F (1W+2W) -40°C to 121°C / -40°F to +250°F (4W) |
| Standard branding | Mylar tape |
| Note | Impulse tested up to 500.000 cycles (tested acc. to ISO6803:2017) |
Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.