Semperit · Hoses
Semperit DIN EN 853 1 SN EHT · Nominal 10 mm
DIN EN 853 1 SN EHT — manufacturer technical reference and quotation support in Saudi Arabia.
Manufacturer-listed size variant: no separate article number is published for this size in the source table. The size label is not an invented part number.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Nominal | 10 mm |
|---|---|
| Nominal | 3/8 inch |
| Nominal | -6 dash |
| Internal-Ø | 9.9 mm |
| Internal-Ø | 0.39 inch |
| Braid-Ø | 15.1 mm |
| Braid-Ø | 0.59 inch |
| External-Ø | 17.5 mm |
| External-Ø | 0.69 inch |
| Work. pressure (max.) | 180 bar |
| Work. pressure (max.) | 2610 psi |
| Min. burst pressure | 720 bar |
| Min. burst pressure | 10440 psi |
| Bending radius (min.) | 125 mm |
| Bending radius (min.) | 4.9 inch |
| Weight approx. | 0.24 lbs/ft |
| Weight approx. | 0.36 kg/m |
Family specifications and selection conditions
| Tube | Synthetic rubber, resistant against hot oil, hydraulic fluids (HL, HLP, HLPD, HVLP, HFA, HFAS, HFB, HFC), mineral and synthetic oils. Glycols, polyglycols and aqueous oil emulsions (up to 100°C / 212°F ) |
|---|---|
| Reinforcement | One braid of high tensile steel wire |
| Cover | Heat, abrasion and ozone resistant synthetic rubber |
| Temperature range | -40°C to 135°C / -40°F to +275°F (up to 150°C / 300°F peak temperatures) |
| Standard branding | White ink-jet |
Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.